Product center-product introduction
Product description:C80B special purpose stainless steel open top car for carrying coal
Main brief introduction:
C80B special purpose stainless steel open top car for carrying coal is suitable for running on Chinese standard gauge railways, mainly acting as the special purpose open top car for transporting coal in 20,000t heavy duty train on Dalian-Qinhuangdao line, for matching the third and the forth phase tipplers in Qinhuangdao dock for coal and the attached equipments, to achieve continuous turning over discharge operation without removing coupler, and it can also be suitable for the requirements for loop loading , direct enter/exit loading, disassembling loading operation , and concentrated traction of locomotive power during running.
It is mainly composed of car body, coupler and draft gear, brake device, bogie etc. Car body is of center sill, flat floor full steel welding structure, it is mainly composed of underframe, side wall, end wall, support rod, door etc. Type 16 coupler is set on position No. 1 end of car set, adopting the matching type 16 forged coupler yoke, and type 17 coupler is set on position No. 2 end of car set, adopting the matching type 17 forged coupler yoke, RFC drawbar is set at the middle of car which can be interchangeable with type 16,17 coupler, adopting alloy coupler yoke key, MT-2, 、HM-1 or HM-2 draft gear, adopting oiliness nylon anti-falling off coupler yoke support plate wear plate, coupler support seat stop iron with anti-theft function, coupler yoke key support sill nylon wear plate, anti-skipping latch. Brake device adopts type 120-1 control valve, wholly spinning sealed brake cylinder, stainless steel snap-in type air reservoir, type ST2-250 double direction brake shoe slack adjuster, KZW-A automatic empty/load changeover device and TZD automatic derail brake device, NSW-Ⅰ hand brake. Adopting K6 bogie.
Main parameters:
|
Load capacity
|
80t
|
Tare weight
|
≤20±4%t
|
Axle load
|
25t
|
Distance between bogie pivot centers
|
8200mm
|
Length of car
|
12000mm
|
Max. height of car (tare)
|
3767mm
|
Commercial running speed
|
100km/h
|
Min. radius of curve negotiated
|
145m
|
Clearance limit conforming to provisions of GB 146.1-1983 Clearance limit for standard gauge railway locomotive and rolling stock
|